Revolabs 10-FLX2-002-VOIP Specifications download pdf (Page 49)

Web Interface

The FLX web interface provides access to advanced configuration settings, call

statistics and system logs. Web access can be enabled or disabled from the FLX

Handset, and the web interface is password protected using the same password that is

required to access Administrator settings on the FLX Handset.

This section describes the web interface, organized as follows:

• Enabling Web Access

• Connecting to the FLX Web Interface

• Home Page

• User Settings

• Administrator Settings

The Administrator Settings section also describes how FLX configuration settings can

be imported and exported to aid in configuring multiple FLX phones in an enterprise.

Enabling Web Access

To enable the web interface, from the FLX Handset select Menu > Setup > Advanced

Setup, enter the administrator password, then select Admin Settings > Web Access

ON/OFF. Press the Enter button to toggle between ON and OFF to control access.

Factory default is web access enabled. To change the password needed to access both

the web interface and advanced settings on the Handset, see the Set Password section

on page 45. The web interface also includes a web session timeout to protect against

unwanted access if the session is left open for more than fifteen minutes.

Connecting to the FLX Web Interface

To use the web interface, open a web browser and navigate to the IP address of the

FLX. If you do not know the IP address of your FLX system, on the handset open the

menu, System Info, About System. The IP address is listed here. The Login page will

appear as shown below.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 89 90

No comments

Revolabs 10-FLX2-002-VOIP Specifications Page 49