Revolabs HD Dual Channel Specifications

Revolabs HD™ Single/Dual Wireless Microphone System Models: 02-HDSGL, 02-HDDUAL, 04-HDSGLEU, 04-HDDUALEU, 04-HDSGLCN, 04-HDDUALCN

- 10 - DIP Switch 5&6 – Microphone EQ: There are four EQ options for the microphone outputs of the Base Station. One of these options can be activ

- 11 - Mics Unmute at Startup: By default the mics go into a muted state when they are removed from the charger. This is done to prevent handling no

- 12 - Note: The microphone firmware version must match the Base firmware version for the system to function properly. A mismatch may result in no au

- 13 - 1. Earpiece jack — accepts the 2.5mm plug for the earpiece. 2. Charging port — docks to Revolabs HD Charger Bases. 3. Pocket clip — also use

- 14 - Adjusting the Volume on the Wearable Microphone Earpiece To change the volume on the Wearable microphone earpiece, use the dial on the earpiece

- 15 - 3. With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashi

- 16 - 5 4 3 2 1 2. Directional Tabletop microphones should be located on the table with the acoustic cover pointed toward the users, trying to keep

- 17 - 1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — pre

- 18 - 5 4 3 2 1 1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger B

- 19 - 1 2 3 Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the Base Stati

© 2010 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written p

- 20 - Power Module The Charger Base requires 5VDC power, provided by the AC Adapter. Plug the supplied AC adapter into an appropriate power outle

- 21 - Revolabs HD™ Indicator LEDs The following tables show activities associated with the various states shown by the LEDs: Equipment Use Microphon

- 22 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the

- 23 - Specifications Dimensions, (L, W, H) and Weight: Single/Dual Base Station 5.19” (13.18 cm) x 3.25” (8.25 cm) x 1.0” (2.54 cm), 0.325 lbs (0

- 24 - Index Adjusting the Volume, 14 Base Station, 7 Back Panel, 7 Front Panel, 7 Channel LED indicators, 7 Channels, 8 Charger Bays, 19 Charging the

- 25 - Revolabs HD™ Single & Dual Manual 01- HDSGLMAN- PAP- 11 APRIL 2012 ( Rev 2

Contents Safety and General Information ...

- 4 - Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User In

- 5 - Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the

- 6 - Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high b

- 7 - • Acoustic echo cancellation (AEC) • Feedback elimination • Level control • Equalization • Noise cancellation The system is designed to op

- 8 - To Install the Base Station: 1. Plug the power cord into an appropriate outlet 2. Connect the necessary outputs and inputs Revolabs HD™ Base

- 9 - 1 2 3 4 5 6 7 8 on off Using the Rear Panel Configuration DIP Switches DIP Switch Feature Off (Default) On 1 Output Mixing Individual Ou