Revolabs HD Venue User Manual

Revolabs HD Venue™ Wireless Microphone System Models: 01-HDVENU, 03-HDVENUEU, 03-HDVENUCN, 03-HDVENUJP User and Set-up Guide

- 10 - Revolabs HD Venue™ Base Station Connections The Revolabs HD Venue™ Base Station, shown below in front and rear panel views, manages wireles

- 11 - Revolabs HD Venue™ Base Station Audio Connections There are two balanced inputs (either ¼” or XLR) and two balanced outputs (either ¼” or XLR)

- 12 - 1 2 3 4 5 6 7 8 on off Using the Rear Panel Configuration DIP Switches DIP Switch Feature Off (Default) On 1 Output Mixing Individua

- 13 - DIP Switch 5&6 – Sharing Mode: To use two HD Venue Systems in the same area, both systems must have DIP Switch 5 set to ON. One of the HD

- 14 - Mics Unmute at Startup: By default the mics go into a muted state when they are removed from the charger. This is done to prevent handling noi

- 15 - Battery: This provides the current battery level for the microphone that is paired to each channel and active. The value changes in 12.5% incr

- 16 - 1. Earpiece jack — accepts the 2.5mm plug for the earpiece. 2. Charging port — docks to Revolabs HD Charger Bases. 3. Pocket clip — also us

- 17 - Adjusting the Volume on the Wearable Microphone Earpiece To change the volume on the Wearable microphone earpiece, use the dial on the earpiec

- 18 - 3. With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a flash

- 19 - 5 4 3 2 1 1. Remove the microphone from the Charger Base to turn on and automatically mute the mic. (indicated by a flashing RED LED) 2. Di

© 2010-2014 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permis

- 20 - 2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — v

- 21 - 5 4 3 2 1 1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger

- 22 - 1 2 3 Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the Base Stat

- 23 - Power Module The Charger Base requires 5VDC power, provided by the AC Adapter. Plug the supplied AC adapter into an appropriate power outlet 1

- 24 - 4. Select the “Firmware” button on the Control Panel 5. Choose the desired firmware version from the location it was saved during download.

- 25 - Revolabs HD™ Indicator LEDs The following tables show activities associated with the various states shown by the LEDs: Equipment Use Micropho

- 26 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the

- 27 - Specifications Dimensions, (L, W, H) and Weight: HD Venue Base Station 16.9” (43.03 cm) x 8.0” (20.32 cm) x 1.7” (4.42 cm), 2.0 lbs (5.45

- 28 - Revolabs HD Venue™ Wireless Microphone System Manual 01-HDVNUMAN-PAP-11 April 2014 (Rev

Contents Safety and General Information ...

- 4 - Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User Informa

- 5 - Industry Canada Notice to Users This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two condi

- 6 - Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of th

- 7 - WEEE Notification: The Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EU) is intended to promote recycling of electrical

- 8 - Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high

- 9 - • Acoustic echo cancellation (AEC) • Feedback elimination • Level control • Equalization • Noise cancellation The system is designed to o