Revolabs Single Channel Wireless Microphone System - Tandbe User Manual download pdf

Revolabs Single Channel Wireless Microphone System- Tandberg 880 MXP

Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a

Revolabs Single Channel System to a Tandberg 880 MXP video codec.

1. Connecting the Cables

2. Configuring the 880 MXP Video Codec

Note:

It is important to carefully follow these instructions in order and completely.

Otherwise your Single Channel System and/or the video codec may not function

properly. Please read through these instructions completely before proceeding.

Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Single Channel System

2. Tandberg 880 MXP video codec

3. QTY 1 07-STEMIC-PPP Line-to-Mic Interface Cable*

*OPTIONAL FROM REVOLABS

NOTE:

IMAGES OF SET UP SCREENS ARE DEFAULT SETTINGS FROM TANDBERG AND ARE PART OF THE

TANDBERG MXP ADMINISTRATOR’S GUIDE © MAY 2008

1 2 3 4

Revolabs Single Channel Wireless Microphone System- Tandberg 880 MXP Setup Guide NOTES AND CAUTIONS: This setup guide will guide you through the st

Connecting the Cables CONNECTING A REVOLABS SINGLE CHANNEL TO TANDBERG 880 MXP VIDEO CODEC 1. Connect the 07-STEMIC-PPP cable between the 2.5mm a

Page 3

Configuring the 880 MXP Video Codec CONFIGURING THE AUDIO MENUS OF THE 880 MXP VIDEO CODEC 1. Go to AUDIO SETTINGS 2. Select INPUTS 3. Confirm

Page 4

6. Return to previous menu and select ECHO CONTROL 7. Enable MIC 1 Echo Canceller (ON) 8. Return to previous menu and select AUDIO LEVELING (

Revolabs Single Channel Wireless Microphone System - Tandbe User Manual